Global Dry Bulk Network

Ferrosilicon UN 1408 With 30% Or More But Less Than 90% Silicon (including Briquettes) (see Appendix To This Schedule)

FERROSILICON UN 1408 with 30% or more but less than 90% silicon (including briquettes) (see appendix to this schedule)

IMSBC GroupNot set
UN NumberUN 1408
Class4.3
Subsidiary Hazard6.1
MHBB
Physical SizeUp to 300 mm briquettes Not applicable 1,389 to 2,083 (1,111 to 1,538 for briquettes)
Angle of Repose0.48 to 0.72
Bulk Density (kg/m³)(0.65 to 0.90 for
Stowage Factor (m³/t)briquettes)
Harmful to Marine EnvironmentNot set
Effective StatusAmended by MSC.575(110)
IMSBC Amendment08-25
Voluntary Application From2026-01-01
Mandatory From2027-01-01
Group not setClass 4.3MHB: BUN 1408Amended by MSC.575(110)
Cargo photo

Schedule source MSC.539(107), Annex 9, Appendix 1, IMSBC Code Amendment 07-23 · pages 223, 224

Description

Ferrosilicon is an extremely heavy cargo.

Hazard

In contact with moisture or water it may evolve hydrogen, a flammable gas which may form explosive mixtures with air and may, under similar circumstances, produce phosphine and arsine, which are highly toxic gases. This cargo is non-combustible or has a low fire risk.

Stowage and Segregation

“Separated from” foodstuffs and all class 8 liquids.

Hold Cleanliness

Clean and dry as relevant to the hazards of the cargo.

Weather Precautions

This cargo shall be kept as dry as practicable before loading, during loading and during the voyage. This cargo shall not be loaded during precipitation. During loading of this cargo, all non-working hatches of the cargo spaces to which this cargo is loaded, or to be loaded, shall be closed.

Loading

Trim in accordance with the relevant provisions required under sections 4 and 5 of IMSBC Code. When the stowage factor of this cargo is equal to or less than 0.56 m3/t, the tank top may be overstressed unless the cargo is evenly spread across the tank top to equalize the weight distribution. Due consideration shall be given to ensure that the tank top is not overstressed during the voyage and during loading by a pile of the cargo. Refer to the appendix to this schedule.

Precautions

The manufacturer or the shipper shall provide the master with a certificate stating that, after manufacture, the cargo was stored under cover, but exposed to dry weather for not less than 3 days prior to shipment.

Ventilation

Continuous mechanical ventilation shall be conducted during the voyage for the cargo spaces carrying this cargo. If maintaining ventilation endangers the ship or the cargo, it may be interrupted unless there is a risk of explosion or other danger due to interruption of the ventilation. In any case, mechanical ventilation shall be maintained for a reasonable period prior to discharge. Refer to the appendix to this schedule.

Carriage

For quantitative measurements of hydrogen, phosphine and arsine, suitable detectors for each gas or combination of gases shall be on board while this cargo is carried. The detectors shall be of certified safe type for use in explosive atmosphere. The concentrations of these gases in the cargo spaces carrying this cargo shall be measured regularly, during the voyage, and the results of the measurements shall be recorded and kept on board.

Discharge

Refer to the appendix to this schedule.

Clean-up

After discharge of this cargo, the cargo spaces shall be swept clean twice. Water shall not be used for cleaning of the cargo space which has contained this cargo, because of danger of gas.

User Insights

Any registered user may suggest cargo information. Submitted text stays hidden until approved by an admin or super admin.

Related Ports

Ports where this cargo is currently listed in Loading or Discharging fields.