Global Dry Bulk Network

Iron Oxide Technical

IRON OXIDE TECHNICAL

IMSBC GroupA
UN NumberNot set
ClassNot applicable
Subsidiary HazardNot applicable
MHBNot applicable
Physical SizeFine particles
Angle of ReposeNot applicable
Bulk Density (kg/m³)1,000
Stowage Factor (m³/t)1.00
Harmful to Marine EnvironmentNot set
Effective StatusExisting from MSC.539(107)
IMSBC Amendment07-23
Voluntary Application From2024-01-01
Mandatory From2025-01-01
Group AClass Not applicableMHB: Not applicableExisting from MSC.539(107)
Cargo photo

Schedule source MSC.539(107), Annex 9, Appendix 1, IMSBC Code Amendment 07-23 · pages 280, 281

Description

Iron oxide technical is generated as a product or by-product in the manufacture of di-iron trioxide (iron (III) oxide) for industrial and commercial use. The material is odourless and red in colour.

Hazard

Dust may cause skin and eye irritation. Iron cargoes may affect magnetic compasses. This cargo may liquefy if shipped at a moisture content in excess of its transportable moisture limit (TML). See sections 7 and 8 of IMSBC Code. This cargo is non-combustible or has a low fire risk.

Stowage and Segregation

No special requirements.

Hold Cleanliness

No special requirements.

Weather Precautions

When a cargo is carried in a ship other than a ship complying with the requirements in 7.3.2 of this Code, the following provisions shall be complied with: .1 the moisture content of the cargo shall be kept less than its TML during loading operations and the voyage; .2 unless expressly provided otherwise in this individual schedule, the cargo shall not be handled during precipitation; .3 unless expressly provided otherwise in this individual schedule, during handling of the cargo, all non-working hatches of the cargo spaces into which the cargo is loaded, or to be loaded, shall be closed; .4 the cargo may be handled during precipitation under the conditions stated in the procedures required in 4.3.3 of IMSBC Code; and .5 the cargo in a cargo space may be discharged during precipitation provided that the total amount of the cargo in the cargo space is to be discharged in the port.

Loading

Trim in accordance with the relevant provisions required under sections 4 and 5 of IMSBC Code.

Precautions

Persons who may be exposed to the dust of the cargo shall wear protective clothing, goggles or other equivalent dust eye-protection and dust filter masks, as necessary. Bilge wells shall be clean, dry and covered as appropriate, to prevent ingress of the cargo.

Ventilation

No special requirements.

Carriage

The appearance of the surface of this cargo shall be checked regularly during the voyage. If free water above the cargo or fluid state of the cargo is observed during the voyage, the master shall take appropriate actions to prevent cargo shifting and potential capsize of the ship, and give consideration to seeking emergency entry into a place of refuge.

Discharge

No special requirements.

Clean-up

After discharge of this cargo, the bilge wells and the scuppers of the cargo spaces shall be checked and any blockage in the bilge wells and the scuppers shall be removed.

User Insights

Any registered user may suggest cargo information. Submitted text stays hidden until approved by an admin or super admin.

Related Ports

Ports where this cargo is currently listed in Loading or Discharging fields.