Global Dry Bulk Network

Titanomagnetite Sand

TITANOMAGNETITE SAND

IMSBC GroupA
UN NumberNot set
ClassNot applicable
Subsidiary HazardNot applicable
MHBNot applicable
Physical SizeUp to 0.4 mm
Angle of ReposeNot applicable
Bulk Density (kg/m³)2,740 to 2,820
Stowage Factor (m³/t)0.35 to 0.36
Harmful to Marine EnvironmentNot set
Effective StatusExisting from MSC.539(107)
IMSBC Amendment07-23
Voluntary Application From2024-01-01
Mandatory From2025-01-01
Group AClass Not applicableMHB: Not applicableExisting from MSC.539(107)
Cargo photo

Schedule source MSC.539(107), Annex 9, Appendix 1, IMSBC Code Amendment 07-23 · pages 451, 452

Description

Titanomagnetite sand has a nominal iron content of 57%.

Hazard

This cargo may liquefy if shipped at a moisture content in excess of its transportable moisture limit (TML). See sections 7 and 8 of IMSBC Code. This cargo is non-combustible or has a low fire risk.

Stowage and Segregation

No special requirements.

Hold Cleanliness

No special requirements.

Weather Precautions

When a cargo is carried in a ship other than a ship complying with the requirements in 7.3.2 of this Code, the following provisions shall be complied with: .1 the moisture content of the cargo shall be kept less than its TML during loading operations and the voyage; .2 unless expressly provided otherwise in this individual schedule, the cargo shall not be handled during precipitation; .3 unless expressly provided otherwise in this individual schedule, during handling of the cargo, all non-working hatches of the cargo spaces into which the cargo is loaded, or to be loaded, shall be closed; .4 the cargo may be handled during precipitation under the conditions stated in the procedures required in 4.3.3 of IMSBC Code; and .5 the cargo in a cargo space may be discharged during precipitation provided that the total amount of the cargo in the cargo space is to be discharged in the port.

Loading

Cargo shall be trimmed to avoid steep surfaces of cargo that could collapse during the voyage. As the density of the cargo is extremely high, the tank top may be overstressed unless the cargo is evenly spread across the tank top to equalize the weight distribution. Due consideration shall be given to ensure that the tank top is not overstressed during the voyage and during loading by a pile of the cargo.

Precautions

Bilge wells shall be clean, dry and covered to prevent ingress of cargo. Bilge covers shall not significantly degrade the capacity or operation of the bilge system. Bilges shall be sounded and pumped out, as necessary, throughout the voyage.

Ventilation

No special requirements.

Carriage

Unless this cargo is carried in a ship complying with the requirements in 7.3.2 of IMSBC Code, the appearance of the surface of this cargo shall be checked regularly during the voyage. If free water above the cargo or fluid state of the cargo is observed during the voyage, the master shall take appropriate actions to prevent cargo shifting and potential capsize of the ship, and give consideration to seeking emergency entry into a place of refuge.

Discharge

No special requirements.

Clean-up

After discharge of this cargo, the bilge wells shall be checked and any blockage shall be removed. If the ship is fitted with a de-watering system of the cargo spaces, after discharge of this cargo, the system shall be checked and any blockage in the systems shall be removed.

User Insights

Any registered user may suggest cargo information. Submitted text stays hidden until approved by an admin or super admin.

Related Ports

Ports where this cargo is currently listed in Loading or Discharging fields.